Siroc Turbo™ cannon heater
Siroc Turbo cannon heater with open combustion for poultry and pig houses
Siroc Turbo™ is a cannon heater that runs on gas or oil with open combustion. This space heater is a high-quality basic solution for poultry and pig houses. Energy efficiency is key as the open combustion means that all the heat generated remains indoors. The energy performance of the Siroc Turbo is therefore very high.
Convection heater that runs on gas or oil for a high-quality basic solution with reliable performance
Safety is a high priority for Siroc Turbo. For example, there are LED lights to indicate the status and any defects, so you can identify the cause of a problem immediately. The list of built-in safety checks can be consulted on this page.
Features of Siroc Turbo cannon heater
Energy efficient space heater with top results
all the heat generated is used to heat the space. No outflow of combustion gases.
with a gas appliance, you will need less ventilation compared with a heater that runs on oil. The projection of the gas heater is 40 meters (131 ft). You can extend this air flow with a fan (optional), which means you only need a limited number of appliances in the poultry or pig house.
you can use this space heater with different types of oil: diesel, kerosene, petroleum and mazut. The projection range of the oil heater is 40 meters (131 ft).
Easy to use and maintain
to guarantee a long lifespan, even with intensive cleaning.
the electronic components are housed in a protective IP65 junction box. The burner controls and the gas valve also have an IP value of 65, which means you can use a pressure washer for cleaning.
the inspection hatches at the top make it easy to access the heating appliance.
Safe and reliable space heater for chickens and pigs
you can easily check the status and defects, so you can identify the cause of a problem immediately.
Want to find out more about the Siroc Turbo space heater? Download the specifications or see our news section and our references.

- Chimney: not available
specifically for gas:
- Fuel: propane, natural gas or LPG (mix propane and butane)
- Power output (or heat output):
- Model 40: 40 kW (136,136 BTU/h)
- Model 70: 70 kW (238,910 BTU/h)
- Model 100: 100 kW (334,390 BTU/h)
- Model 120: 120 kW (409,045 BTU/h)
specifically for oil:
- Fuel: diesel, kerosene, petroleum and mazut
- Power output (or heat output):
- Model 80: 80 kW – 8 L (272,971 BTU/h)
- Model 100: 100 kW – 10 L (341,300 BTU/h)
- Model 120: 120 kW – 12 L (409,560 BTU/h)
- 1 motor: drives the main fan and oil pump
Durability specifications:
- Body: stainless chromium alloy steel
- Main burner: components made of stainless steel
- Cleaning: pressure washer
- Easy ignition: electronic
- Efficient air supply: inlet ring on suction fan makes the appliance quiet
- Available connections: option to use a climate computer or a space thermometer and use a minimum amount of ventilation — immediately or at a later date.
specifically for gas:
-
Circuit board, gas valve and transformer: can be replaced separately (don’t need to replace all three parts at once)
specifically for oil:
-
Standard: breather and filter included in package
Safety specifications:
- Prevent overheating in the burner chamber: maximum thermostat with sensor built in
specifically for gas:
- Ignition monitoring 1: windvane checks the fan’s functioning before ignition
- Ignition monitoring 2: ionization electrode checks whether there is sufficient gas and air to start the ignition
specifically for oil:
-
Ignition monitoring: photocell detects whether there is a flame before ignition